FLASKS

Order Kimax Flasks from Voigt Global. We offer Kimax Cell Culture Flask, Kimax Boiling Flask, Kimax Culture Flask, Kimax Two Neck Flask, Kimax Erlenmeyer Flask, Kimax Kjeldahl Flask, Kimax Volumetric Certified Flask, Kimax Volumetric Flask, Kimax Three Neck Flask to all Federal, State, University and Scientific agencies. Kimax Cell Culture Flask, Kimax Boiling Flask, Kimax Culture Flask, Kimax Two Neck Flask, Kimax Erlenmeyer Flask, Pyrex Distilling Flask, Pyrex Distilling Three Neck Flask, Kimax Kjeldahl Flask, Kimax Volumetric Certified Flask, Kimax Volumetric Flask, Kimax Three Neck Flasks are available at discounted prices for bulk orders and resellers. Kimax Cell Culture Flask, Kimax Boiling Flask, Kimax Culture Flask, Kimax Two Neck Flask, Kimax Erlenmeyer Flask, Pyrex Distilling Flask, Pyrex Distilling Three Neck Flask, Kimax Kjeldahl Flask, Kimax Volumetric Certified Flask, Kimax Volumetric Flask, Kimax Three Neck Flask and all Kimax Flask specifications are available via e-mail upon request. Below is a brief listing of some of the various flasks that we are able to provide you. Please check below for pricing on our most popular requested styles. Please inquire today!

	Cell Culture Flask Baffled Cell Culture Shaker Flask - designed for use with rotary and reciprocating shakers where baffle indents provide greater turbulance to improve oxygen transfer rates or aeration. These Kimble Kimax Pyrex cell culture flasks have a neck with a plain fire-polished finish and suitable for a plastic cap.

FLAT BOTTOM FLASK Flat-Bottom Boiling Flasks, Chemglass Flasks have a single neck, flat bottom, and a [ST] outer joint.

KIMAX BOILING FLASK SHORT NECK FLAT BOTTOM Flasks Boiling, Flat Bottom, Short Neck, with 24/40 Joint KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E 1403, Type I, Class 4 requirements.

KIMAX BOILING FLASK SHORT NECK ROUND BOTTOM Flasks Boiling, Round Bottom, Short Neck, 24/40 Joint KIMAX boiling flask designed from ASTM Specification E1403, Type II, Class 3 requirements.

KIMAX CULTURE FLASKS Flasks Culture, Long Neck, with Capacity Scale KIMAX flask has a thick-walled tubing neck with a plain fire polished finish, sealed to an Erlenmeyer-shaped body. Neck is long enough to accept a metal or plastic cap, or a cotton plug may be used if desired. All flasks have durable white ceramic enamel scales to indicate approximate volumes at various levels. Designed from ASTM Specification E1404, Type IV, Class 1 requirements.

TWO NECK ROUND BOTTOM FLASK Round-Bottom Boiling Flasks with Two Necks, Heavy Wall, Chemglass Round bottom, heavy wall, two-neck flask with [ST] outer joints on both the center neck and 20°-angled side neck. Both side neck and center neck have the same joint size.

KIMAX TWO NECK ROUND BOTTOM FLASK Flasks Distilling, Two Neck Round Bottom, Heavy Wall Two neck flask with outer joints on both vertical necks.

KIMAX ERLENMEYER FLASK NARROW MOUTH Flasks Erlenmeyer, Narrow Mouth, Color KIMAX flasks for economy and versatility. All flasks have durable, color, ceramic enamel scales to indicate approximate volumes at various levels. Designed from ASTM Specification E1404, Type I, Class 1 requirements.

KIMAX ERLENMEYER FLASK WIDE MOUTH Flasks Erlenmeyer, Wide Mouth, Heavy-Duty Tooled Top Finish, with Capacity Scale KIMAX flask with a wide mouth. Designed from ASTM Specification E1404, Type I, Class 2 requirements.

KIMAX KJELDAHL FLASK KIMAX Kjeldahl Flasks, Kimble Chase All flasks have reinforcing beads at the top. The 500mL and 800mL flasks have tooled necks to provide for accurate fit of stoppers and to reduce possibility of breakage. The 30mL size is designed from ASTM Specification E147. The 100mL and larger sizes are designed from ASTM Specification E1377, Type I requirements.

KIMAX KJELDAHL FLASK Flasks Kjeldahl, Heavy Wall Kjeldahl flask with a outer joint at top.

KIMAX VOLUMETRIC FLASK CERTIFIED Flasks Volumetric, Class A, Serialized and Certified, Stopper KIMAX flask is permanently marked with an individual serial number and is supplied with a Certificate of Graduation Accuracy. Graduation ring is blasted on the neck. Flask is calibrated to contain. Supplied with a marking spot and a ground glass stopper. These flasks have been carefully selected to meet the requirements for accuracy, appearance, glass quality, calibration line, and inscriptions of former NBS Circular 602. Designed from ASTM Specification E288, Class A serialized requirements. Replacement stopper is 41900R.

KIMAX VOLUMETRIC FLASK Flasks Volumetric, Class A KIMAX flask with a single graduation ring blasted on the neck, calibrated to contain. A ground glass stopper is supplied along with a durable, color, matte finish marking area for use with an ordinary pencil. Designed from ASTM Specification E288, Class A unserialized requirements. Replacement stopper is 41900R.

KIMAX THREE NECK ROUND BOTTOM FLASK Flasks Distilling, Three Neck Round Bottom, Heavy Wall Three neck round bottom flask with outer joints. Side necks are angled.

FILTERING FLASK KIMAX Filtering Flasks with Detachable Plastic Sidearm, Capacity Scale Flasks have an autoclavable plastic sidearm designed to accept 7.9mm (5/16") I.D. flexible tubing. Sidearm has finger grips for easy insertion or removal. Opening in sidearm is larger at flask end to hold a cotton plug securely. Graduated with white scales to indicate approximate volumes. Designed from ASTM Specification E1406, Type III, Class 2 requirements.

KIMAX FILTER FLASK Flasks Filtering, Heavy Wall, Side Tubulation, with Capacity Scale KIMAX flask with side tubulation. Flasks are designed to take 1 atmosphere of vacuum or 29" of mercury. Sizes 25 mL through 500 mL have side hose connection designed to accept 5/16 inch I.D. flexible tubing. Sizes 1000 mL and larger accept 3/8 inch I.D. tubing. Designed from ASTM Specification E1406, Type II, Class I requirements. Made with a heavier wall than a standard Erlenmeyer flask.

DISTILLING THREE NECK FLASK PYREX Distilling Flasks, Vertical Type, Three Necks, [ST] Joints, Corning Particularly suitable for use with a stirring device, condenser, or other apparatus as a unit. Made from heavy wall blanks to withstand severe service. With full length outer [ST] joints.

DISTILLING FLASK PYREX Distilling Flasks, Corning The sidearm of the 125mL flask is located approximately 137mm from the bottom of the flask as required in ASTM E1405 and can be used in ASTM Tests D86 and D447. This size has a heavy-duty neck. The sidearm on the 250mL size is placed 77mm below the top of the neck at a 75° angle and can be used with thermometers calibrated for 76mm immersion.

FERNBACH FLASKS PYREX Fernbach Culture Flask, Corning Designed for use in the conversion of commercial dextrose to gluconic acid through mold metabolism. Ideal for the growth of large colonies of bacteria and other cultures. Used also in the production of serums. Takes stopper No. 13-14. Capacity: 2.8L. (Corning 4420-2XL) Caution: Do not use this flask on a heat source smaller than the base of the flask. Uneven heating of the flask could cause breakage.

FERNBACH CULTURE FLASK Fernbach Culture Flask, Polycarbonate, NALGENE For growing large-scale cultures. Window-clear polycarbonate construction. Base has 20.3cm (8") diameter. The neck accepts No. 13 rubber stopper. Break-resistant. Autoclavable, but repeated autoclaving may reduce mechanical strength. Capacity: 2.8L. (NNI 4105-2800)

IODINE DETERMINATION FLASKS PYREX Iodine Determination Flasks, [ST] Stopper, Corning Blown in a specially-designed mold to ensure uniformity and proper contour. The stopper handle projects above the liquid seal trough to facilitate removal of the stopper. With [ST] stopper No. 22. ASTM D29 and D555.

IODINE DETERMINATION FLASKS KIMAX Iodine Flasks with [ST] PTFE Stopper Flasks are used in the analysis of dry shellac and shellac varnishes. May also be used to determine the total iodine value of oils, fatty acids, and bodied oils with Rosenmund-Kuhnhenn reagent (ASTM D1541). The 500mL flask is required in the testing of drying oils for use in paints and varnishes, either with Wijs solution or Hanus iodine-bromine solution (ASTM D555). With [ST] 22 PTFE stopper. Designed from ASTM Specification E1404, Type II, Class 3 requirements.